![background image](http://html1.mh-extra.com/html/panasonic/kx-utg200/kx-utg200_administrators-manual_4133185243.webp)
Description
Specifies the pattern, in milliseconds, of the hold alarm using up to 10
whole numbers (on 1, off 1, on 2, off 2…) separated by commas.
Value Range
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
Default Value
120,14880
CW_TONE1_FRQ
Value Format
Comma-separated Integer
Description
Specifies the dual-tone frequencies, in hertz, of call waiting tone 1 using
2 whole numbers separated by a comma.
Value Range
0, 200–2000 (0: No tone)
Default Value
425
CW_TONE1_GAIN
Value Format
Integer
Description
Specifies the gain, in decibels, of call waiting tone 1.
Value Range
(-80)–0
Default Value
0
CW_TONE1_RPT
Value Format
Boolean
Description
Specifies whether call waiting tone 1 is repeated.
Value Range
•
Y (Repeat)
•
N (No Repeat)
Default Value
Y
CW_TONE1_TIMING
Value Format
Comma-separated Integer
Description
Specifies the pattern, in milliseconds, of call waiting tone 1 using up to
10 whole numbers (on 1, off 1, on 2, off 2…) separated by commas.
Value Range
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
Document Version 2014-04
Administrator Guide
243
5.5.5 Tone Settings
Summary of Contents for KX-UTG200
Page 188: ...188 Administrator Guide Document Version 2014 04 4 9 4 Sniffer Dump...
Page 284: ...284 Administrator Guide Document Version 2014 04 5 8 SSH Settings...
Page 302: ...302 Administrator Guide Document Version 2014 04 7 5 SSH Settings Debug Settings...
Page 303: ...Index Document Version 2014 04 Administrator Guide 303...