background image

Description

Specifies the pattern, in milliseconds, of Dial Tone 4 (stutter dial tones)
to notify that a voice mail is waiting, using up to 22 whole numbers (off
1, on 1, off 2, on 2…) separated by commas.

Note

It is recommended that you set a value of 560 milliseconds or
more for the first value (off 1).

Value Range

0–16000 (0: Infinite time)

Note

Avoid setting 1–50 for any of the values.

Default Value

560,100,100,100,100,100,100,100,100,100,100,100,100,100,100,10
0,100,100,100,100,100,0

Web User Interface Reference

Tone Timings (Page 142)

REORDER_TONE_FRQ

Value Format

Comma-separated Integer

Description

Specifies the dual-tone frequencies, in hertz, of reorder tones using 2
whole numbers separated by a comma.

Value Range

0, 200–2000 (0: No tone)

Default Value

480,620

Web User Interface Reference

Tone Frequencies (Page 142)

REORDER_TONE_GAIN

Value Format

Integer

Description

Specifies the gain, in decibels, of the reorder tone.

Value Range

(-80)–0

Default Value

0

REORDER_TONE_RPT

Value Format

Boolean

Description

Specifies whether the reorder tone is repeated.

Value Range

Y (Repeat)

N (No Repeat)

Default Value

Y

240

Administrator Guide

Document Version  2014-04  

5.5.5 Tone Settings

Summary of Contents for KX-UTG200

























































































































































































































































































































Reviews: