Value Range
3–50 (
´
10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than
[Initial Delay]
–
This value must be greater than
[Minimum Delay]
–
[Initial Delay]
must be greater than or equal to
[Minimum
Delay]
Default Value
20 (
´
10 ms)
Configuration File Reference
Minimum Delay
Description
Specifies the minimum delay, in 10-millisecond units, of the jitter buffer.
Value Range
1 or 2 (
´
10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be less than or equal to
[Initial Delay]
–
This value must be less than
[Maximum Delay]
–
[Maximum Delay]
must be greater than
[Initial Delay]
Default Value
2 (
´
10 ms)
Configuration File Reference
Initial Delay
Description
Specifies the initial delay, in 10-millisecond units, of the jitter buffer.
Value Range
1–7 (
´
10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than or equal to
[Minimum
Delay]
–
This value must be less than
[Maximum Delay]
Default Value
2 (
´
10 ms)
Configuration File Reference
4.5.3.4 DTMF
DTMF Type
Description
Selects the method for transmitting DTMF (Dual Tone Multi-Frequency)
tones.
116
Administrator Guide
Document Version 2014-04
4.5.3 VoIP Settings [Line 1]–[Line n]
Summary of Contents for KX-UTG200
Page 188: ...188 Administrator Guide Document Version 2014 04 4 9 4 Sniffer Dump...
Page 284: ...284 Administrator Guide Document Version 2014 04 5 8 SSH Settings...
Page 302: ...302 Administrator Guide Document Version 2014 04 7 5 SSH Settings Debug Settings...
Page 303: ...Index Document Version 2014 04 Administrator Guide 303...