![background image](http://html1.mh-extra.com/html/panasonic/kx-utg200/kx-utg200_administrators-manual_4133185128.webp)
Default Value
No
Block Anonymous Call
Description
Selects whether to reject incoming calls that do not show the caller’s
number.
Value Range
•
Yes
•
No
Default Value
No
Do Not Disturb
Description
Selects whether to enable the Do Not Disturb feature for incoming calls.
Note
•
If Do Not Disturb has been enabled on the server, the server
rejects incoming calls and the unit does not receive any calls,
even if you have selected
[No]
for this setting.
•
If you change this setting when
[Feature Key
Synchronization]
is set to
[Yes]
, the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Value Range
•
Yes
•
No
Default Value
No
Return Code When DND
Description
Specifies the return code sent when the unit is in Do Not Disturb mode.
Value Range
400–699
Default Value
403
Configuration File Reference
SIP_RESPONSE_CODE_DND (Page 281)
Return Code When Refuse
Description
Specifies the return code sent when the unit refuses a call.
Value Range
400–699
Default Value
603
Configuration File Reference
SIP_RESPONSE_CODE_CALL_REJECT (Page 281)
128
Administrator Guide
Document Version 2014-04
4.6.2 Call Control [Line 1]–[Line n]
Summary of Contents for KX-UTG200
Page 188: ...188 Administrator Guide Document Version 2014 04 4 9 4 Sniffer Dump...
Page 284: ...284 Administrator Guide Document Version 2014 04 5 8 SSH Settings...
Page 302: ...302 Administrator Guide Document Version 2014 04 7 5 SSH Settings Debug Settings...
Page 303: ...Index Document Version 2014 04 Administrator Guide 303...