background image

Day

Using the 2 following settings, specify on which day of the selected month DST (Summer Time) ends. For
example, to specify the second Sunday, select 

[Second]

 and 

[Sunday]

.

Description

Selects the day of the week on which DST (Summer Time) ends.

Value Range

Sunday

Monday

Tuesday

Wednesday

Thursday

Friday

Saturday

Default Value

Sunday

Configuration File Reference

DST_STOP_DAY_OF_WEEK (Page 206)

Week

Description

Selects the number of the week on which DST (Summer Time) ends.

Value Range

1st

2nd

3rd

4th

Last

Default Value

2nd

Configuration File Reference

DST_STOP_ORDINAL_DAY (Page 206)

Time

Description

Specifies the end time of DST (Summer Time) in minutes after 12:00
AM.

Value Range

0–1439

Default Value

120

Configuration File Reference

DST_STOP_TIME (Page 207)

4.5  VoIP

This section provides detailed descriptions about all the settings classified under the 

[VoIP]

 tab.

102

Administrator Guide

Document Version  2014-04  

4.5 VoIP

Summary of Contents for KX-UTG200

























































































































































































































































































































Reviews: