Panasonic KX-TVS90, Installation Manual

Page: 201 / 410

SYSTEM FEATURES
Installation Manual 201
Fax Management allows the VPS to automatically route an
incoming fax signal to a specific fax machine.
Up to 2 fax machines can be assigned using
this feature. Outside callers can also reach the
fax machine via Custom Service selection, if
programmed.
A special mailbox can be assigned to the Fax
Manager. In this way, the VPS can notify the
Fax Manager of the status of faxes.
• See "Fax Management (1-5-7-
8)" in 5.2.2
Custom Service
Features.
• See 7.3.11 Fax Call Report.
• See 7.3.12 Fax Call Statistics
Clear.
• See "Other Parameters-Fax
Management" in B6.7
Other
Parameters.
Group Distribution
List—Personal allows a subscriber to simultaneously send a
message to several mailboxes using a Group
Distribution List. This list is established by
the subscriber. Each subscriber can maintain
a maximum of 4 lists with up to 20 entries on
each list. • See "Group Distribution List—
System" in this Table.
• See "Personal Group
Distribution List" in Glossary.
• See 4.5 Personal Group
Distribution Lists in the
Subscriber's Guide.
• See 4.6 Deleting Group
Distribution Members in the
Subscriber's Guide.
• See 4.7 Deleting Group
Distribution List Names in the
Subscriber's Guide.
Group Distribution
List—System allows a subscriber to send a message to
several mailboxes using a Group Distribution
List. Also allows a caller to record a message
into all mailboxes within the list. The System
Administrator must establish this list. The
VPS can maintain up to 20 lists with a
maximum of 20 entries on each. • See "System Group
Assignment-Mailbox Group" in
B6.1
System Group
Assignment.
• See C8 DELIVERING
MESSAGES.
• See "System Group Distribution
List" in Glossary.
Hold provides the caller with the option of
temporarily holding the call when the line is
busy. The VPS automatically recalls the
extension after a specified period of time.
When several callers hold their calls to the
same extension, callers are connected in the
order in which they originally called. • See "Other Parameters-Call
Hold" in B6.7
Other
Parameters.
Table 34
FEATURE DESCRIPTION REFERENCES