manualshive.com logo in svg

Panasonic KX-TVS90, Installation Manual, Page: 164 / 410

Share
Download
Panasonic KX-TVS90 Installation Manual Download Page 164

SYSTEM MAINTENANCE AND TROUBLESHOOTING

164

Installation Manual

7.2.7

Saving the System Data to the Backup Device (SAVE)

All system programming data and voice prompts can be saved in separate data files. To save 
this data, connect a data terminal to the RS-232C port of the VPS. Save the files individually. 
Execute the SAVE command for each data file. It will require several minutes to execute this 
command for all the data selected. When performing this operation, always wait until the 
process completion indication appears.

WARNING

Never save (back-up) and upload the "Program" without Panasonic Technical support.

The memory required to save each data component is indicated below.

Saving items 4-7 below will depend upon the length of the recorded messages.

4. User Prompts-1

5. User Prompts-2

6. Custom Service Menus (Custom service recordings)

7. Personal Greetings (Subscriber greetings)

8. Company Greetings

Table 31 Error and Warning Indications During System Operation

Indication

Meaning

FLASH MEMORY STORAGE SPACE IS 
NOW EXCEEDING
80%...

80 % or more of the Flash Memory voice 
message save area is used.

ASCII TERMINAL program Load Error

Error loading of ASCII terminal control 
program.

1.  Program—approximately 1 Mbytes (See Warning above)
2.  Parameters—approximately 0.4 Mbyte (System Configuration)
3.  System Prompts—approximately 5 Mbytes (Do not save—prompts are 
     saved as defaults in the flash memory)

Summary of Contents for KX-TVS90



























































































































































































































































































































































































































Reviews:

No comments