Panasonic KX-TVS90, Installation Manual

Page: 105 / 410

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
Installation Manual 105
4.5.7 Live Call Screening Button Assignment via Station
Programming
For the Live Call Screening feature to work at an extension, the extension must have an LCS
button lit at the time of the message reception. This key must either be a DSS/BLF or CO key
with a lamp. Follow the procedure below to assign an LCS button on an extension. (This is a
station level program and should be done at each individual telephone.)
PC programming is also available for KX-TD500 users (see 4.5.12
Button Assignment via
PC Programming).
1.
Enter PITS Programming:
For KX-TA624
With the phone on-hook, Set the MEMORY switch to "PROGRAM" .
(Display changes to PITS-PGM Mode.)
For KX-T series PBX that uses DPT Integration
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99] . (Display changes to PITS-PGM Mode.)
2.
Press the desired FLEXIBLE ( CO or DSS/BLF ) button you want to assign as the LCS
button.
3.
Dial [92] .
Screen output: LCS
4.
Press STORE .
5.
For KX-TA624
Set the MEMORY switch to "SET" .
For KX-T series PBX that uses DPT Integration
Press the PROGRAM button or lift the handset.
6.
Repeat these steps for each telephone.
4.5.8 Live Call Screening Cancel Button Assignment via Station
Programming
This button assignment allows you to assign a Flexible (CO, DSS) button as a Live Call
Screening Cancel button.
PC programming is also available for KX-TD500 users (see 4.5.12
Button Assignment via
PC Programming).
1.
Enter PITS Programming:
For KX-TA624
With the phone on-hook, Set the MEMORY switch to "PROGRAM" .
(Display changes to PITS-PGM Mode.)
For KX-T series PBX that uses DPT Integration
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99] . (Display changes to PITS-PGM Mode.)