manualshive.com logo in svg

Panasonic KX-TVS90, Installation Manual, Page: 26 / 410

Share
Download
Panasonic KX-TVS90 Installation Manual Download Page 26

INSTALLATION

26

Installation Manual

2.1

SAFETY PRECAUTIONS

Please read the following precautions before installing the VPS.

2.1.1

Installation

The VPS needs to be mounted on a wall. Improper placement of the system may result in 
malfunction, noise, or discoloration. Avoid installing the VPS in the following places:

•

in direct sunlight; in hot, cold, or humid places

•

in new areas where there are thermal springs, etc. (where sulfuric gas may damage the 
equipment or contacts).

•

where shocks or vibrations are frequent or strong.

•

in dusty places or places where water or oil may come in contact with the unit.

•

near high frequency generating devices such as sewing machines, elevators or electric 
welders.

•

on or near computers, telexes, or other office equipment; near microwave ovens or air 
conditioners. (Ideally, the VPS should not be in the room with these items and should be 
at least 

1.8 m {6 feet} 

away from televisions.)

Do not obstruct the areas around the PBX and the VPS.

 Both require space above for cooling 

and space on the sides for maintenance and inspection.

Summary of Contents for KX-TVS90



























































































































































































































































































































































































































Reviews:

No comments