Panasonic KX-TVS90 Installation Manual Download Page 316

Page: 316 / 410

SYSTEM MANAGER'S GUIDE

316

Installation Manual

Press [2]

to accept the number if it is correct.

Note

Press [2] to add mailbox numbers. Press [3] to review the mailing list. Press [ ] to
cancel message transfer.

Press [1]

to record a message.

Record

the

message

at the tone and

Press [1]

Press [2]

to accept the entry.

Press [1]

to specify the delivery time and the private status.

Note

Press [2] to send the message immediately and return to the Main Menu.

10.

Press [1]

to specify the delivery time.

11.

Type

the

time

and

Press [#]

12.

Press [1]

for

[2]

for

Note

This selection is not available if "24-h" is selected in "Position of 'AM/PM' in Time
Stamp" in Table 59 in

B6.5

Prompt Setting.

13.

Type

the

date (month and day)

and

Press [#]

14.

Press [2]

to accept the entry.

15.

Press [1]

to make this message private; otherwise,

Press [2]

Summary of Contents for KX-TVS90



























































































































































































































































































































































































































Search results

Summary of Contents for KX-TVS90

Reviews:

Panasonic KX-TVS90, Installation Manual, Page: 316 / 410

Search results

Summary of Contents for KX-TVS90

Reviews: