Panasonic KX-TS600FX Operating Instructions Manual Download Page 42

Page: 42 / 48

Plugging the optional headset into the unit allows a hands-free phone
conversation. Please use only a Panasonic KX-TCA89EX.

Connecting the Optional Headset to the Unit

Connect the optional headset to the headset jack as shown below.

Making/Answering Calls

Make sure to install the batteries.

Press

[SP-PHONE/HEADSET]

to make or answer a call.

Dial the number and press

[SP-PHONE/HEADSET]

to make a call.

• The

SP-PHONE/HEADSET

indicator lights.

• If you misdial during pre-dialling, press

[ERASE]

and enter the correct

number. Then press

[SP-PHONE/HEADSET]

for dialling.

To hang up, press

[SP-PHONE/HEADSET]

• The indicator light goes out.

To adjust the headset receiver volume (4 levels):

While using the headset, press

VOLUME

[

]

[

]

• During a conversation using the headset, you cannot switch the call to using the

handset by simply lifting it off the cradle.

• If you disconnect the optional headset during a conversation with the handset on

the cradle, the call will be switched to the speakerphone.

• During a conversation using the speakerphone, you can switch the call to the

headset by connecting the headset.

If you want to have a conversation without hands-free feature, disconnect the
headset.

Headset
Jack

Hook

Optional Headset

TS600FX.book Page 42 Wednesday, April 5, 2006 10:27 AM

Summary of Contents for KX-TS600FX

















































Search results

Summary of Contents for KX-TS600FX

Reviews:

Related manuals for KX-TS600FX

Brands by name

Popular brands

Panasonic KX-TS600FX, Operating Instructions Manual

Search results

Summary of Contents for KX-TS600FX

Reviews:

Related manuals for KX-TS600FX

Brands by name

Popular brands