Panasonic KX-TS600FX Operating Instructions Manual Download Page 25

Page: 25 / 48

Basic Operation

Erasing Caller List Information

After checking the Caller List, you can erase some or all of the entries.

Make sure that the handset is on the cradle, and the SP-PHONE/
HEADSET indicator light is off.

To erase a specific caller from the Caller List

Press

[

]

[

]

to enter the Caller List.

Scroll to the caller you want to erase
from the Caller List by pressing

[

]

[

]

Press

[ERASE]

• A long beep sounds and the information

is erased.

• After a few seconds, the display will show

the previous caller information.

• To exit the Caller List, press

[EXIT]

or wait

for 60 seconds.

To erase all entries in the Caller List

Press

[

]

[

]

to enter the Caller List.

Press

[ERASE]

Press

[OK]

(

Yes

key).

• A long beep sounds and all entries are

erased.

• The unit will exit the Caller List.

1234567890

10:50 23.11

Erased

Caller list

10 missed calls

All erase ?
[

]=No [OK]=Yes

All erased

TS600FX.book Page 25 Wednesday, April 5, 2006 10:27 AM

Summary of Contents for KX-TS600FX

















































Search results

Summary of Contents for KX-TS600FX

Reviews:

Related manuals for KX-TS600FX

Brands by name

Popular brands

Panasonic KX-TS600FX, Operating Instructions Manual

Search results

Summary of Contents for KX-TS600FX

Reviews:

Related manuals for KX-TS600FX

Brands by name

Popular brands