Panasonic KX-TS600FX Operating Instructions Manual Download Page 14

Page: 14 / 48

Settings

Time Adjustment (Caller ID subscribers only)

Using this feature, the unit’s date and time setting will be automatically
adjusted when caller information is received.
You can set the auto time adjustment by programming.
Your phone default setting is OFF.

Make sure that the handset is on the cradle and the SP-PHONE/
HEADSET indicator light is off.

Press

[FUNCTION/EDIT]

Scroll to “

Program ?

” by pressing

[

]

[

]

. Press

[OK]

(

Yes

key).

Scroll to “

Time adjustment?

” by

pressing

[

]

[

]

Press

[OK]

(

Yes

key).

Select “

” or “

Off

” by pressing

[

]

[

]

(Example: “On” is selected.)

Press

[OK]

(

Save

key).

• A long beep sounds.
• The display will return to step 3. To exit the

programming mode, press

[EXIT]

or wait

for 60 seconds.

• To use this feature, set the date and time

in advance (p. 9).

Time adjustment?

[OK]=Yes

Time adjustment

:On

[OK]=Save

TS600FX.book Page 14 Wednesday, April 5, 2006 10:27 AM

Summary of Contents for KX-TS600FX

















































Search results

Summary of Contents for KX-TS600FX

Reviews:

Related manuals for KX-TS600FX

Brands by name

Popular brands

Panasonic KX-TS600FX, Operating Instructions Manual

Search results

Summary of Contents for KX-TS600FX

Reviews:

Related manuals for KX-TS600FX

Brands by name

Popular brands