Panasonic KX-TS600FX Operating Instructions Manual Download Page 10

Page: 10 / 48

Settings

Press

[#]

to select “AM”, “PM” or 24-hour

clock.
(Example: You select “PM”.)

• Each time you press

[#]

, the selection will

change on the display.

Press

[OK]

(

key).

Enter the current day and month using
a 4-digit number.
(Example: To set Dec. 27, enter “2712”.)

Press

[OK]

(

Save

key).

• A long beep sounds.
• The clock starts working.
• The display will return to step 2. To exit

the programming mode, press

[EXIT]

wait for 60 seconds.

• You can go back to the previous screen by pressing

[

]

, when setting the time

and date (steps 4 through 10).

• If 3 beeps sound when entering the time and date, the time and date entered are

not correct. Enter the correct time and date.

If the batteries installed in the unit expired, the time and date will be shown as
“

0:00 31.12

” or “

12:00AM 31.12

”, and “

” will flash. Replace the batteries

then adjust the time and date.

For Caller ID service users (p. 18)

If a time display service is available with the Caller ID service:

• The Caller ID information will re-set the clock after the ring if the adjusted time

and/or date is incorrect and when the Time Adjustment is set to ON (p. 14). If
the time and date has not previously been set, the Caller ID information will not
adjust the clock.

#=AM/PM/24H

[OK]=Next

Option

Display

24H

24-Hour clock

Enter day.month

31.12

[OK]=Save

Enter day.month

27.12

[OK]=Save

TS600FX.book Page 10 Wednesday, April 5, 2006 10:27 AM

Summary of Contents for KX-TS600FX

















































Search results

Summary of Contents for KX-TS600FX

Reviews:

Related manuals for KX-TS600FX

Brands by name

Popular brands

Panasonic KX-TS600FX, Operating Instructions Manual

Search results

Summary of Contents for KX-TS600FX

Reviews:

Related manuals for KX-TS600FX

Brands by name

Popular brands