Panasonic KX-TS600FX Operating Instructions Manual Download Page 16

Page: 16 / 48

Making Calls

To redial the last number dialled

Using the handset:

Lift the handset

press

[REDIAL]

Press

[REDIAL]

Lift the handset.

Using the speakerphone:

Press

[SP-PHONE/HEADSET]

press

[REDIAL]

Press

[REDIAL]

press

[SP-PHONE/

HEADSET]

To redial using the redial list (Memory Redial)

The last 20 phone numbers dialled are stored in the redial list.

1. Press

[REDIAL]

• The last number dialled and “

” are displayed.

• When the number dialled has been stored in the Phonebook, the name is also

displayed.

2. Scroll to the desired number by pressing

[

]

[

]

• You can also scroll through the list by pressing

[REDIAL]

• To exit the list, press

[EXIT]

3. Lift the handset or press

[SP-PHONE/HEADSET]

• To erase an item, repeat steps 1 and 2, and press

[ERASE]

• If “

No items stored

” is displayed, the list is empty.

To adjust the handset volume (4 levels) or the speaker
volume (8 levels) while talking

To increase, press

VOLUME

[

]

. To decrease, press

VOLUME

[

]

• The display shows the volume level for a few seconds.

Automatic Redial:

When using the speakerphone, the unit redials the last dialled number up to
15 times within a 10-minute period if the line is busy. During Auto redial,
“

Waiting redial

” will be displayed and the SP-PHONE/HEADSET

indicator light flashes.

Example: Handset volume level: 2

Example: Speaker volume level: 3

“

” shows one level.

“

” shows one level.

Loud

Low

????

High

Loud

Low

???

High

TS600FX.book Page 16 Wednesday, April 5, 2006 10:27 AM

Summary of Contents for KX-TS600FX

















































Search results

Summary of Contents for KX-TS600FX

Reviews:

Related manuals for KX-TS600FX

Brands by name

Popular brands

Panasonic KX-TS600FX, Operating Instructions Manual

Search results

Summary of Contents for KX-TS600FX

Reviews:

Related manuals for KX-TS600FX

Brands by name

Popular brands