Panasonic KX-TG5456 Operating Instructions Manual Download Page 63

Page: 63 / 76

Useful Information

For assistance, please visit http://www.panasonic.com/consumersupport

Battery charge

The unit does not record
new messages.

The answering system is turned off. Turn it on (page 46,
51).

The recording time is set to “

Greeting only

”. Select

“

1min

”, “

2min

”, or “

3min

” (page 53).

Message memory is full. Erase unnecessary messages
(page 47).

If you subscribe to the Voice Mail service, messages
are recorded by the telephone company not your
telephone. Change the unit’s “

Ring count

” setting so

that the unit’s answering system can answer the call
before the Voice Mail service or consult your telephone
company (page 52).

I cannot operate the
answering system.

Someone is operating the answering system.

During message
playback, the unit rings
and cancels playback.

A call is being received. Answer the call and start again
from the beginning after hanging up.

The message indicator
on the handset flashes
slowly.

New messages have been recorded. Listen to the new
messages (page 47) or turn the message alert off (page
53).

When you play back
messages or turn on the
answering system, the
base unit and handset
announce the day and
time incorrectly.

Set the date and time again (page 18).

Problem

Cause & solution

“

Recharge battery

” is

displayed,

flashes or

the handset beeps
intermittently.

Fully charge the battery (page 11).

“

Charge for 6 HRS

”

and

are displayed

and the handset does not
work.

The battery has been discharged. Fully charge the
battery (page 11).

Problem

Cause & solution

Summary of Contents for KX-TG5456













































































Search results

Summary of Contents for KX-TG5456

Reviews:

Related manuals for KX-TG5456

Brands by name

Popular brands

Panasonic KX-TG5456, Operating Instructions Manual

Search results

Summary of Contents for KX-TG5456

Reviews:

Related manuals for KX-TG5456

Brands by name

Popular brands