Panasonic KX-TG5456 Operating Instructions Manual Download Page 11

Page: 11 / 76

Preparation

For assistance, please visit http://www.panasonic.com/consumersupport

Battery charge

Place the handset on the base unit for

hours

before initial use.

The unit will beep once, the CHARGE
indicator will light, and “

Charging

” will

be displayed.

“

Charge completed

” is displayed

when the battery has been fully charged.
The CHARGE indicator will remain lit.

Note:

To ensure the battery charges properly,
clean the charge contacts of the handset
and base unit with a soft, dry cloth once
a month. Clean more often if the unit is
subject to grease, dust, or high humidity.

Battery strength

You can confirm the battery strength on the
handset display.

Recharging the battery

Recharge the battery when:
– “

Recharge battery

” is displayed or

flashes on the handset display.

– the handset beeps intermittently while it

is in use.

Note:

Recharge the handset battery for more
than 15 minutes, or the display will
continue showing the indication.

If the battery has been discharged, the
handset will display “

Charge for 6

HRS

” and

when you place the

handset on the base unit.

CHARGE indicator

Battery icon

Battery strength

Fully charged

Medium

Low
When flashing: needs
to be recharged.

Discharged

Summary of Contents for KX-TG5456













































































Search results

Summary of Contents for KX-TG5456

Reviews:

Related manuals for KX-TG5456

Brands by name

Popular brands

Panasonic KX-TG5456, Operating Instructions Manual

Search results

Summary of Contents for KX-TG5456

Reviews:

Related manuals for KX-TG5456

Brands by name

Popular brands