Panasonic kx-tg5438c Operating Instructions Manual Download Page 7 | Manualshive

Page: 7 / 68

background image

Introduction

7

L

Do not touch the plug with wet hands.

L

The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the unit and is
easily accessible.

Battery

To reduce the risk of fire or injury to
persons, read and follow these
instructions.

L

Use only the battery(ies) specified.

L

Do not dispose of the battery(ies) in a
fire. They may explode. Check with local
waste management codes for special
disposal instructions.

L

Do not open or mutilate the battery(ies).
Released electrolyte is corrosive and
may cause burns or injury to the eyes or
skin. The electrolyte may be toxic if
swallowed.

L

Exercise care when handling the
battery(ies). Do not allow conductive
materials such as rings, bracelets or
keys to touch the battery(ies), otherwise
a short circuit may cause the battery(ies)
and/or the conductive material to
overheat and cause burns.

L

Charge the battery(ies) provided with or
identified for use with this product only in
accordance with the instructions and
limitations specified in this manual.

WARNING:

L

To prevent the risk of fire or electrical
shock, do not expose this product to rain
or any type of moisture.

Medical

L

Consult the manufacturer of any
personal medical devices, such as
pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. (The unit operates in
the frequency range of 5.76 GHz to 5.84
GHz, and the power output level can
range from 0.25 to 0.5 watts.) Do not use

the unit in health care facilities if any
regulations posted in the area instruct
you not to do so. Hospitals or health care
facilities may be using equipment that
could be sensitive to external RF (radio
frequency) energy.

Splash-resistant (handset only)

The handset is designed to be splash-
resistant.
You can use the handset with wet hands.

L

Do not immerse in water or leave under
running water.

L

Keep the handset away from salt water.

L

Avoid exposure to prolonged high
humidity.

L

Since water in headset jack may cause
damage, close the headset jack cover
when the optional headset is not in use.
When the optional headset is
connected, do not use the handset with
wet hands.

L

If the handset is wet, wipe with a soft dry
cloth.

L

The base unit is not designed to be
splash resistant. Do not place the
handset on the base unit if the handset
is wet.

Shock-resistant (handset only)

The handset is designed to be shock-
resistant, however, it should not be thrown
or stepped on.

TG5438C_5439C(e-e).book Page 7 Saturday, November 6, 2004 11:17 AM

«
...
5
6
7
8
9
...
»

Summary of Contents for kx-tg5438c





































































Reviews:

No comments

Related manuals for kx-tg5438c

Brand: Janome Pages: 2

Brand: IGEBA Pages: 59

Brand: IGEBA Pages: 48

Brand: Tennant Pages: 16

Brand: Savin Pages: 143

Brand: XPower Pages: 12

Brand: Nilfisk-ALTO Pages: 64

Brand: Numatic Pages: 28

Brand: MIMAKI Pages: 5

Brand: Singer Pages: 50

Brand: Happy Pages: 98

Brand: Magic Pages: 4

Brand: Lievers Pages: 52

Brand: Tema Telecomunicazioni Pages: 38

Brand: ZOJE Pages: 65

Brand: ZOJE Pages: 104

Brand: Baoyu Pages: 14

Brand: Renz Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands