Answering System Features
50
*1 If pushed within the first 5 seconds of a
message, the previous message will be
played.
*2 To resume operation, enter a remote
command within 15 seconds, or the
voice guidance will start.
Turning on the answering system
remotely
If the answering system is off, you can turn
it on remotely.
1
Dial your phone number.
2
Let the phone ring 15 times.
L
The unit will answer your call with the
greeting message.
L
You can hang up, or if you call from a
touch tone phone, you can enter your
remote code and begin remote
operation (page 49).
Skipping the greeting message to leave
a message
You can leave a message just as any
outside caller can. Call your phone
number, then press
{*}
to skip the
greeting message and record your
message after the beep.
Answering system
settings
Remote code
A remote code must be entered when
operating the answering system remotely.
This code prevents unauthorized parties
from listening to your messages remotely.
Store any 2-digit number (00–99). The
default setting is “
11
”.
1
Press
{
MENU
}
.
2
Scroll to “
Initial setting
” by
pressing
{V}
or
{^}
, then press
{
>
}
.
3
Scroll to “
Set answering
” by pressing
{V}
or
{^}
, then press
{
>
}
.
4
Scroll to “
Remote code
” by pressing
{V}
or
{^}
, then press
{
>
}
.
5
Select the desired remote code by
entering a 2-digit number (00–99).
6
Press
{
Save
}
, then press
{
OFF
}
.
Note:
L
To confirm the remote code, repeat
steps 1 to 4. Press
{
OFF
}
when finished.
TG5438C_5439C(e-e).book Page 50 Saturday, November 6, 2004 11:17 AM
