Panasonic KX-TG2730CS Operating Instructions Manual Download Page 37

Page: 37 / 104

Cordless Telephone

≥

Caller information cannot be displayed in the following cases:

≥

—If the caller dialed from an area which does not provide a Call Display service,

the display will show “

Unavailable Name & No.

”.

≥

—If a long distance call is identified and the caller’s name and/or number cannot

be received, the display will show “

Long distance

”.

≥

—If the caller has requested not to display his/her information, the display will

show “

Private caller

”.

≥

If your unit is connected to a PBX which does not support Call Display services,
you cannot access those services.

≥

The name display service may not be available in some areas. For further
information, please contact your telephone company.

≥

If the handset has lost communication with the base unit when a call is received,
the caller information will not be recorded in the Caller List.

Using the Caller List

“

If you have received new calls, “

Received calls

” will be displayed

while the handset is not in use.

Handset off the base unit

Handset on the base unit

≥

If the battery needs to be charged, “

Received calls

” will not be displayed

(p. 13).

PRIVACY

[1]

Received calls

P L A Y

PRIVACY

[1]

Received calls

P L A Y

PQQX13405ZA-BM-3E 02.6.4 3:43 PM ページ 37

Summary of Contents for KX-TG2730CS









































































































Search results

Summary of Contents for KX-TG2730CS

Reviews:

Related manuals for KX-TG2730CS

Brands by name

Popular brands

Panasonic KX-TG2730CS, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2730CS

Reviews:

Related manuals for KX-TG2730CS

Brands by name

Popular brands