71
Answering System
“
Setting the Mailbox Password
(for Mailbox 2 and 3)
You can use Mailbox 2 or 3 for your personal mailbox, and prevent
unauthorized people from accessing the mailbox and listening to the
messages. Assign 2-digit password (00–99) to Mailbox 2 or 3. Each
password and the remote code (p. 81) must be unique. Once the
password is assigned to Mailbox 2 or 3, no one can access the mailbox to
listen to messages without entering the password.
Make sure the base unit and the handset are not being used.
1
Press
(CONF/FUNCTION)
, and scroll to
“
Initial setting
” by pressing
(›)
or
(‹)
, and press
(fl)
.
2
Scroll to “
Set answering
” by pressing
(›)
or
(‹)
, and press
(fl)
.
3
Scroll to “
Set mailbox2&3
” by pressing
(›)
or
(‹)
.
4
Press
(fl)
.
5
Select the mailbox by pressing
(‹)
(Mailbox 2) or
(›)
(Mailbox 3).
≥
If the password has already been assigned to
the mailbox, it is displayed.
6
Enter a password using
a 2-digit number
(00–99)
.
≥
If you entered a wrong number, press
(HOLD/CLEAR)
and enter the password again.
7
Press the right soft key (
).
≥
A beep sounds.
≥
If 3 beeps sound, you entered the same password as the other mailbox or
the remote code (p. 81) or the entered password was one-digit. Start again
from step 6 and select another password.
≥
To exit the programming mode, press
(OFF)
.
To check the password:
Repeat steps 1 to 5.
≥
The password is displayed. When finished, press
(OFF)
.
To erase the password
Press
(HOLD/CLEAR)
in step 6, and press the right soft key (
).
≥
You will be able to access the mailbox without entering the password.
SAVE
SAVE
Copy directory
1
Initial setting
2Way radio mode
Set tel line
1
Set answering
Set base unit
Set password
3
=Mailbox2
4
=Mailbox3
Remote code
1
Set mailbox2&3
---------------
Set password
Mailbox2 :--
43
S A V E
Set password
Mailbox2 :22
43
S A V E
PQQX13405ZA-BM-5E 02.6.4 3:43 PM ページ 71
