78
“
Remote Operation with the Handset
For Call Display service users
(p. 36)
During playback, the display shows the
name and/or number of the caller whose
message is being played.
To call back the displayed number:
Press the left soft key (
) while the number is displayed.
≥
The handset stops playback and automatically dials the phone number.
≥
If you need to edit the phone number to call back, press the right soft key
(
) until the desired edit pattern displays. The number will be edited to
one of three patterns (p. 40). You can then call back the caller.
EDIT
DIAL
≥
You can switch to another mailbox by pressing
(#)
and the mailbox number
(
(1)
to
(3)
) during the remote operation.
≥
The unit will announce the remaining recording time after playback, if it is less
than 5 minutes.
≥
If a call is being received during the remote operation, you will hear incoming
call tones (p. 69). To answer the call, press
or
.
≥
If you hear “
Memory full
” after playback, erase some, or all, of the messages
(p. 79).
Voice menu
If no commands are entered after you listened to new messages in the
mailbox and heard “
End of final message
”, the handset will start the
following voice menu.
“
Press 4 to play back new messages. Press 5 to play back all messages.
”
≥
You can enter direct commands even if the voice menu has started.
SMITH,JACK
234-567-8901
---Message 1----
2
=Repeat
1
=Skip
D I A L
E D I T
PQQX13405ZA-BM-6E 02.6.4 3:44 PM ページ 78
