Panasonic KX-TG2730CS Operating Instructions Manual Download Page 13

Page: 13 / 104

Preparation

≥

The battery operating time may be shortened depending on usage conditions
and ambient temperature.

≥

Clean the handset and the base unit charge contacts with a soft, dry cloth
once a month. Clean more often if the unit is subject to grease, dust or
high humidity.

Otherwise the battery may not charge properly.

≥

If the battery is fully charged, you do not have to place the handset on the base
unit until “

Recharge battery

” is displayed and/or “

” flashes. This will

maximize the battery life.

≥

The battery cannot be overcharged.

Recharge

Recharge the battery when:
—“

Recharge battery

” is displayed on

the handset,

—“

” flashes on the display, or

—the handset beeps intermittently while it is in use.

≥

If you DO NOT recharge the handset battery for more than 15 minutes, the
display will continually indicate “

Recharge battery

” and/or “

” will flash

when the handset is lifted off the base unit.

≥

If the battery has been discharged, the handset will display “

Charge for

15HRS

” and “

” when you place the handset on the base unit. The handset

will not work. Keep charging.

Battery information

After your Panasonic battery is fully charged (p. 12):

PRIVACY

[1]

Recharge battery

P L A Y

Operation

Operating time

While in use (TALK)

While not in use (Standby)

Up to 4.5 hours

Up to 11 days

When using the 2-Way Radio mode (p. 60) with the battery fully charged:

Operation

Operating time

While in use (TALK)

While not in use (Standby)

Up to 4.5 hours

Up to 12 hours

≥

The battery operating time will be shortened using the Reception Booster feature
(p. 31).

While using the Reception Booster feature (p. 31)

Up to 3.5 hours

PQQX13405ZA-BM-2E 02.6.4 3:42 PM ページ 13

Summary of Contents for KX-TG2730CS









































































































Search results

Summary of Contents for KX-TG2730CS

Reviews:

Related manuals for KX-TG2730CS

Brands by name

Popular brands

Panasonic KX-TG2730CS, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2730CS

Reviews:

Related manuals for KX-TG2730CS

Brands by name

Popular brands