Panasonic KX-TG2361JX Operating Instructions Manual Download Page 78 | Manualshive

Page: 78 / 80

background image

78

Safety Instructions

Take special care to follow the safety suggestions listed below.

Safety

1) The unit should be connected to a power supply only of the type described in the

operating instructions or as marked on the unit.

2) When left unused for a long period of time, the base unit should be unplugged

from the household AC outlet.

Installations
Environment

1) Do not use this unit near water—for example, near a bathtub, washbowl, sink,

etc. Damp basements should also be avoided.

2) The unit should be kept away from heat sources such as radiators, kitchen

range, etc. It also should not be placed in rooms where the temperature is less

than 5 C or greater than 40 C.

3) The AC adaptor is used as the main disconnect device, ensure that the AC outlet

is located/installed near the unit and is easily accessible.

Placement

1) Do not place heavy objects on top of this unit.
2) Care should be taken so that objects do not fall onto, and liquids are not spilled

into, the unit. Do not subject this unit to excessive smoke, dust, mechanical
vibration or shock.

3) Place the unit on a flat surface.

For best performance

1) If noise prevents the conversation from being understood at the handset,

approach the base unit to lessen the noise.

2) The handset should be used at the HIGH volume setting when the reception tone

is difficult to hear.

3) The handset should be fully recharged on the base unit when “

Recharge

battery

” is displayed and/or “

7

” flashes.

4) The handset antenna should not be touched during use because of its high

sensitivity.

5) The maximum calling distance may be shortened when the unit is used in the

following places: Near obstacles such as hills, tunnels, undergrounds, near metal
objects such as wire fences, etc.

Medical

Consult the manufacturer of any personal medical devices, such as pacemakers or
hearing aids, to determine if they are adequately shielded from external RF (radio
frequency) energy. (The unit operates in the frequency range of 2400 MHz to
2481 MHz, and the power output level can range from 0.04 watts to 0.1 watts.) Do
not use the unit in health care facilities if any regulations posted in the area instruct
you not to do so. Hospitals or health care facilities may be using equipment that
could be sensitive to external RF (radio frequency) energy.

Operating near 2.4 GHz electrical appliances may cause interference. Move away
from the electrical appliances.

TG2361JX.book 78 ページ２００９年１２月１７日　木曜日　午前１１時５５分

«
...
76
77
78
79
80
»

Summary of Contents for KX-TG2361JX

















































































Reviews:

No comments

Related manuals for KX-TG2361JX

Brand: Dakota Alert Pages: 2

Brand: Daisy Pages: 16

Brand: DAINCUBE Pages: 38

Brand: Telstra Pages: 6

Brand: Radio Shack Pages: 36

FortiVoice 50E6

Brand: Fortinet Pages: 22

Brand: XtendLan Pages: 63

WRT-10-H Series

Brand: C.J. ANDERSON Pages: 8

Brand: Doro Pages: 72

Brand: Yealink Pages: 4

Brand: Makita Pages: 36

Brand: SpectraLink Pages: 75

Brand: Sony Pages: 2

Brand: Sony Pages: 18

IT-M602 - Telephone With Speaker Phone

Brand: Sony Pages: 80

Brand: Sony Pages: 80

IT-M704 - Corded Phone 28 1 Touch

Brand: Sony Pages: 104

Brand: Sony Pages: 132

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands