Panasonic KX-TG2361JX Operating Instructions Manual Download Page 62

Page: 62 / 80

Erasing Messages

The unit will announce the remaining recording time after playback if it is less than
3 minutes.
New messages cannot be recorded when:
—“

Memory full

” is heard.

—“

” flashes on the base unit.

—the ANSWER ON indicator flashes rapidly (when the Answering System is on).
Erase unnecessary messages. We recommend you erase unnecessary messages
after each playback.

Erasing a specific message

Press

[ERASE]

while the message you want

to erase is being played.

• The unit beeps, then plays back the next message.
• To exit playback mode, press

[STOP]

twice.

Press

[

] [4]

while the message you want to

erase is being played.

• The unit beeps, then plays back the next message.
• To exit remote operation mode, press

[OFF]

Erasing all messages

All recorded messages, except the greeting message, can be erased at one time.

• Information in the Caller List will not be erased. To erase caller information, see

page 37.

Press

[ERASE]

while the base unit is not being used

• “

To erase all messages, press ERASE again

” is heard.

Within 10 seconds, press

[ERASE]

again.

• The unit beeps, then announces “

No messages

”.

• The base unit display shows “

”.

Press

[MENU]

Press

Select

at “

Message play

”.

Press

[

] [5]

• The unit beeps, then announces “

No messages

”.

• To end remote operation, press

[OFF]

FULL

[ERASE]

ANSWER ON Indicator

[STOP]

Base Unit

Handset

Base Unit

Handset

TG2361JX.book 62 ページ２００９年１２月１７日　木曜日　午前１１時５５分

Summary of Contents for KX-TG2361JX

















































































Search results

Summary of Contents for KX-TG2361JX

Reviews:

Related manuals for KX-TG2361JX

Brands by name

Popular brands

Panasonic KX-TG2361JX, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2361JX

Reviews:

Related manuals for KX-TG2361JX

Brands by name

Popular brands