Panasonic KX-TG2361JX Operating Instructions Manual Download Page 10

Page: 10 / 80

Installation

Installing the Battery in the Handset

Insert the battery (

), and press it down until it snaps into the compartment (

Close the cover.

To replace the battery:

Press the notch on the cover firmly and slide it as indicated
by the arrow. Replace the old battery with a new one
(p. 11). Close the cover and charge the battery for 6 hours.

Battery Charge

Place the handsets on the base unit and
charger. Charge for

6 hours

before

initial use.

• The unit beeps once, the CHARGE

indicator lights, and “

Charging

” is

displayed.

• When the battery is fully charged, “

Charge

completed

” is displayed.

Battery strength

You can confirm battery strength
on the handset display.
Battery strength is indicated by
the icons shown in the chart to
the right.

Display prompt

Battery strength

Fully charged

Medium

Low

(flashing)

Needs to be recharged.

Discharged

CHARGE Indicator

AND

TG2361JX.book 10 ページ２００９年１２月１７日　木曜日　午前１１時５５分

Summary of Contents for KX-TG2361JX

















































































Search results

Summary of Contents for KX-TG2361JX

Reviews:

Related manuals for KX-TG2361JX

Brands by name

Popular brands

Panasonic KX-TG2361JX, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2361JX

Reviews:

Related manuals for KX-TG2361JX

Brands by name

Popular brands