Panasonic KX-TG2361JX Operating Instructions Manual Download Page 33

Page: 33 / 80

lephone System

Using the Caller List

The unit can record information up to 50 different callers and store this information
in the Caller List. Caller information is sorted by the most recent call to the oldest.
When the 51

call is received, the information from the 1

call is deleted.

The unit will also tell you how many calls you missed while you were out or
unavailable to answer the phone.

• When new messages have been recorded (p. 60), “

New message

” will be

displayed in place of missed calls display.

Viewing the Caller List

• Each handset has its own Caller List. If you viewed the Caller List or answered a

call on one handset, the same information in the other handset will be displayed
as “

missed

”.

• If you do not press any buttons for 60 seconds, the unit will exit the Caller List.

The display will show the number of calls you
missed.

Press

Rcvd calls

to review other calls

logged in the Caller List.
• If there are no items in the Caller List, “

Rcvd

calls

” will not be displayed.

• After viewing the missed call entries, “

missed

calls

” will disappear from the display.

Press

Rcvd calls

[

]

, or

[

]

to enter the

Caller List.

To search from the most recent call, press

[

]

To search from the oldest call, press

[

]

Press

[OFF]

to exit the list.

2 missed calls

Rcvd Phone

calls book

Handset off the base unit or
charger

Handset on the base unit or
charger

[1]

2 missed calls

Charging

Handset

2 missed calls

Rcvd

Phone

calls

book

2 missed calls

=Scroll

list

All erase

Ex. 2 calls missed.

TG2361JX.book 33 ページ２００９年１２月１７日　木曜日　午前１１時５５分

Summary of Contents for KX-TG2361JX

















































































Search results

Summary of Contents for KX-TG2361JX

Reviews:

Related manuals for KX-TG2361JX

Brands by name

Popular brands

Panasonic KX-TG2361JX, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2361JX

Reviews:

Related manuals for KX-TG2361JX

Brands by name

Popular brands