Panasonic KX-TG2361JX Operating Instructions Manual Download Page 77

Page: 77 / 80

Troubleshooting

Usef

ul Inform

ation

General

You cannot erase messages.

• While another user is operating the

Answering System or a caller is leaving a
message, you cannot erase messages.

When you play back messages or
turn on the Answering System, the
handset and/or base unit
announces the wrong day and time.

• The date and time may be set incorrectly.

Set the date and time again (p. 14).

Problem

Cause & Remedy

The handset and/or base unit
does not work.

• Check the settings (p. 9–11).
• Check whether the dialing mode setting is

correct (p. 15).

• Fully charge the battery (p. 10).
• Clean the charge contacts and charge again

(p. 11).

• Check battery installation (p. 10).
• Unplug the base unit’s AC adaptor to reset

it. Plug in, and try again.

• Re-install the battery (p. 10) and fully charge it.

Time setting is erased, and “

”

flashes on the base unit
display or “

Press MENU.

”

flashes on the handset display.

• If a power failure occurs, time setting may

be erased. Set the date and time again
(p. 14).

“

Recharge battery

” is

displayed, “

” flashes, or the

handset beeps intermittently.

• Fully charge the battery (p. 10).

“

Charge for 6h

” and “

”

are displayed and the handset
does not work.

• The battery has been discharged. Fully

charge the battery (p. 10).

• Check battery installation (p. 10).

You charged the battery fully,
but “

Recharge battery

” is

still displayed and/or “

”

continues to flash, or “

Charge

for 6h

” and “

” are

displayed.

• Clean the charge contacts and charge again

(p. 11).

• The battery may need to be replaced. If you

install a new battery, fully charge it (p. 10).

The CHARGE indicator does
not go out after the battery has
been charged.

• This is normal.

Problem

Cause & Remedy

TG2361JX.book 77 ページ２００９年１２月１７日　木曜日　午前１１時５５分

Summary of Contents for KX-TG2361JX

















































































Search results

Summary of Contents for KX-TG2361JX

Reviews:

Related manuals for KX-TG2361JX

Brands by name

Popular brands

Panasonic KX-TG2361JX, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2361JX

Reviews:

Related manuals for KX-TG2361JX

Brands by name

Popular brands