Panasonic KX-TG2361JX Operating Instructions Manual Download Page 19

Page: 19 / 80

epar

ion

Programmable Settings

Base unit ringer tone
(use either the handset or the base unit)

Make sure the base unit is not being used.

Setting the base unit ringer tone by using the

Select the desired ringer tone by pressing

[

]

[

]

• The handset will ring and the ringer tone will

change. If the ringer volume has been turned off,
the handset will not ring (p. 17).

• You can also select the ringer tone by pressing

[1]

[7]

Press

Save

, then press

[OFF]

Press

VOLUME [

]

[

]

, then select the desired ringer tone by pressing

[1]

[7]

[1]

[3]

: Bell ringer patterns

[4]

[7]

: Melody patterns

• After pressing

VOLUME

[

]

[

]

, the base unit will ring using the current ringer

tone.

• The base unit will ring and the ringer tone will change.
• To stop ringing, press

[STOP]

Press

[MENU]

Scroll to “

Initial setting

” by pressing

[

]

[

]

, then press

Select

Scroll to “

Set base unit

” by pressing

[

]

[

]

, then press

Select

Press

Select

at “

Ringer tone

”.

Select the desired ringer tone by pressing

[

]

[

]

• The base unit will ring and the ringer tone will change. If the base unit ringer

volume has been turned off, the base unit will not ring (p. 18).

• You can also select the ringer tone by pressing

[1]

[7]

Press

Save

, then press

[OFF]

Ringer tone

1:Tone 1

Back

Save

Base Unit

Handset

TG2361JX.book 19 ページ２００９年１２月１７日　木曜日　午前１１時５５分

Summary of Contents for KX-TG2361JX

















































































Search results

Summary of Contents for KX-TG2361JX

Reviews:

Related manuals for KX-TG2361JX

Brands by name

Popular brands

Panasonic KX-TG2361JX, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2361JX

Reviews:

Related manuals for KX-TG2361JX

Brands by name

Popular brands