Panasonic KX-TES824 Features Manual Download Page 70

Page: 70 / 298

1.8 Toll Restriction (TRS) Features

Feature Guide

Conditions

•

This feature functions only for extensions whose:

–

Account code mode is set to "Verify-Toll" (

Account Code Mode [605]).

–

Class of service (COS) number is set to 3 through 5.

•

If the extension user does not enter an account code or enters an invalid account code, an ordinary
TRS check is performed.

•

System programming determines whether SMDR (

1.20.1 Station Message Detail Recording

Feature) logs the 4-digit account code or the 2-digit index of the account code when an extension user
makes a call using this feature (

SMDR Account Code [805]).

•

It is also possible to override TRS at another extension using the Walking COS feature (

1.8.5

Walking COS).

Feature Guide References

1.5.2.3 Account Code Entry

Summary of Contents for KX-TES824











































































































































































































































































































Search results

Summary of Contents for KX-TES824

Reviews:

Related manuals for KX-TES824

Brands by name

Popular brands

Panasonic KX-TES824, Features Manual

Search results

Summary of Contents for KX-TES824

Reviews:

Related manuals for KX-TES824

Brands by name

Popular brands