manualshive.com logo in svg

Panasonic KX-TES824, Features Manual

Share
Download
Panasonic KX-TES824 Features Manual Download Page 101

1.14 Paging Features

Feature Guide

101

1.14 Paging Features

1.14.1 Paging

Description

An extension user can make a paging announcement to several people at once. 
The announcement is heard through the built-in speakers of proprietary telephones (PTs) and/or an external 
pager (loudspeaker), depending on the type of Paging that is performed as follows: 

The paged person can answer the page from a nearby telephone. It is possible to page with a call on hold 
in order to transfer the call.

Paging Deny

It is possible for each extension to deny being paged.

Conditions

•

Hardware Requirement:

 A user-supplied external pager.

•

A confirmation tone will be sent to the external pager before the paging announcement. It is possible 
to eliminate the tone through system programming (

 External Pager Access Tone [106]). 

•

Only one person can use this feature at a time.

•

Extensions that cannot be paged are:

–

Ringing or busy PTs

–

PTs in Paging Deny mode

–

PTs in DND mode (

 1.3.1.3 Do Not Disturb (DND))

Installation Manual References

2.8.1 Connecting Peripherals

User Manual References

1.6.1 Paging

1.6.2 Answering/Denying a Paging Announcement

Type

Paging method

All Extensions

The page is heard through the built-in speakers of all PTs.

External

The page is heard through an external pager.

Group

The page is heard through the built-in speakers of the PTs that belong to 
a certain extension group (

 Extension Group [600]). 

All Extensions & External

The page is heard through the built-in speakers of all PTs and an external 
pager simultaneously.

Summary of Contents for KX-TES824











































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands