manualshive.com logo in svg

Panasonic KX-TES824, Features Manual

Share
Download
Panasonic KX-TES824 Features Manual Download Page 67

1.8 Toll Restriction (TRS) Features

Feature Guide

67

[Flowchart]

Conditions

WARNING

The software contained in the TRS feature to allow user access to the network must be upgraded to 
recognise newly established network area codes and exchange codes as they are placed into 
service.
Failure to upgrade the on-premise PBXs or peripheral equipment to recognise the new codes as 
they are established will restrict the customer and users of the PBX from gaining access to the 
network and to these codes.
KEEP THE SOFTWARE UP TO DATE WITH THE LATEST DATA.

•

Emergency numbers, such as the police or fire services, should be stored (

 Emergency Number 

[309]) so that they are not barred by TRS.

•

Host PBX Access Code/Carrier Exception Code

TRS checks can be carried out on telephone numbers dialled using a Host PBX Access code (

 

An extension user tries to make 
an outside (CO) line call.

Was the number dialled using 
System Speed Dialling?

What is the COS number?

Is the dialled number found in an 
applicable Denied Code Table?

Is the dialled number found in an 
applicable Exception Code Table?

The call is denied.
The user hears a reorder tone.

Is the COS number higher 

than the System Speed 

Dialling Class?

The call is permitted.

Yes

COS 1

COSs 2–5

No or Equal

Yes

Yes

No

Yes

No

No

Summary of Contents for KX-TES824











































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands