manualshive.com logo in svg

Panasonic KX-TES824, Features Manual

Share
Download
Panasonic KX-TES824 Features Manual Download Page 28

1.2 Receiving Group Features

28

Feature Guide

1.2.3

Direct Inward System Access (DISA) Ring

Description

A Direct Inward System Access (DISA) ring group is a specific extension group that receives DISA calls 
directed to the group. All extensions in the DISA ring group assigned as an Automated Attendant (AA) 
destination (

 DISA Built-in AA [501]) ring simultaneously.

Delayed Ringing

Each extension can be programmed for Delayed Ringing (

 Delayed Ringing—Day/Night/Lunch [411-

413]), which allows extensions to be alerted to calls by flashing buttons only. Received calls can be 
answered by pressing the flashing button even if the extension is not ringing.

Conditions

•

To use this feature, "DISA" must be selected as the distribution method for the desired outside (CO) line 
port (

 CO Line Mode—Day/Night/Lunch [414-416]), and DISA AA service must be assigned as the 

destination of incoming outside (CO) line calls via the DISA feature (

 DISA Incoming Call Dial Mode 

[500]).

•

The Log-in or Log-out status can be set for each extension (

 1.2.4 Log-in/Log-out). The last member 

of a group cannot log out.

•

The Delayed Ringing feature does not apply to DISA or Direct In Line (DIL) calls. If the destination is a 
DISA ring group, this feature will function.

Feature Guide References

1.15.6 Direct Inward System Access (DISA)

2.2.2 Group

Delayed Ringing:

Rings after a 
specified time delay.

Immediately ring simultaneously.

Extn.

A

Extn.

B

Extn.

C

Extn.

D

Summary of Contents for KX-TES824











































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands