3.2 Installing in the KX-TDA100/KX-TDA200/KX-TDA600 PBX
Information about IP Proprietary Telephones
25
2.
Holding the card as shown below, push the release lever in the direction of the arrow so that the card
engages securely with the connector on the back board.
3.
Turn the 2 screws clockwise to fix the card in place.
Note
Make sure the screws are tightened to earth the card securely.
Release Lever
Back Board
Screws
Summary of Contents for KX-TDA50
Page 3: ...Information about IP Proprietary Telephones 3 Section 1 Introduction...
Page 11: ...Information about IP Proprietary Telephones 11 Section 2 Guidance for VoIP Installation...
Page 30: ...3 3 Connecting to the LAN 30 Information about IP Proprietary Telephones...
Page 43: ...Information about IP Proprietary Telephones 43 Appendix A Troubleshooting...