1.2 Network Management
10
Information about IP Proprietary Telephones
•
The Hybrid IP-PBX receives VLAN settings only from the connected switching hub. Therefore,
VLAN settings for the Hybrid IP-PBX must be assigned at the switching hub.
•
Some PC LAN cards allow VLAN settings to be assigned. However, when using a PC connected
to an IP-PT with 2 ports, the VLAN settings for PC communications must be assigned only to the
secondary port of the IP-PT. Any VLAN settings assigned to the PC LAN card must be disabled.
These settings can usually be identified by "802.1Q", "802.1p", or "VLAN" in their name.
•
If you are using an IP-PT with a primary port only (e.g., KX-NT265), a PC cannot be connected to
the IP-PT.
Summary of Contents for KX-TDA50
Page 3: ...Information about IP Proprietary Telephones 3 Section 1 Introduction...
Page 11: ...Information about IP Proprietary Telephones 11 Section 2 Guidance for VoIP Installation...
Page 30: ...3 3 Connecting to the LAN 30 Information about IP Proprietary Telephones...
Page 43: ...Information about IP Proprietary Telephones 43 Appendix A Troubleshooting...