4.2 Programming the IP Proprietary Telephone
Information about IP Proprietary Telephones
37
IP-PTs with a single line display (e.g., KX-NT265)
*1
Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid IP address range: "0.0.0.0" to "255.255.255.255"
*3
Valid IP address range: "1.0.0.0" to "223.255.255.255"
IP Address*
1
Subnet Mask Address*
2
Default Gateway Address*
3
To set the IP address of the IP-PT
To set the subnet mask address
To set the default gateway address (if required)
To enter the IP address of the IP-EXT card (PBX IP Address)
To start programming
Supply power to the IP-PT.
Press PROGRAM
while "Searching" is displayed.
.
PROG.
Press VOLUME to
select "Network".
VOL
Press SP-PHONE.
Press VOLUME to
select "DHCP (Disable)".
VOL
Press SP-PHONE
twice.
Press SP-PHONE.
Press VOLUME to
select "Subnet Mask".
VOL
Press SP-PHONE.
Press SP-PHONE.
Press VOLUME to
select "Default GW".
VOL
Press SP-PHONE.
Press SP-PHONE.
Press HOLD
twice to return
to the Menu screen.
HOLD
Press VOLUME
to select "PBX".
VOL
Press SP-PHONE
twice.
Press SP-PHONE.
To the VLAN settings
The IP-PT will reboot
and establish connection
to the network.
To end programming
To set VLAN parameters
OR
Press STORE.
PBX IP
Address*
1
Press HOLD
to return to the
Menu screen.
HOLD
Summary of Contents for KX-TDA50
Page 3: ...Information about IP Proprietary Telephones 3 Section 1 Introduction...
Page 11: ...Information about IP Proprietary Telephones 11 Section 2 Guidance for VoIP Installation...
Page 30: ...3 3 Connecting to the LAN 30 Information about IP Proprietary Telephones...
Page 43: ...Information about IP Proprietary Telephones 43 Appendix A Troubleshooting...