Panasonic KX-TA616, Installation Manual, Page: 68 / 246

3-18 Features
D
3 Features
*1: The DISA Delayed timer starts. This is the time between a call reaching the system and
being received. The time is assigned in program [504].
*2: When the assigned time period in program [519] expires, the system sends a short beep
to the caller.
*3: The Intercept Timer for Internal DISA starts. This is the time the system waits for the
number sent by the caller. If nothing is entered by the caller during this time, the system
will regard it as “Nothing is dialed.” The time is assigned in program [515].
*4: The system can accept the following numbers:
• 100 through 199 as an extension number.
• 81 through 86 as an outside (CO) line group line access number.
• 9 as an automatic line access number when “Without AA” is assigned in program
[500]. Even if “With AA” is assigned, 9 is regarded as the automatic line access
number if nothing is assigned to “9” in program [501]. In case “9” is assigned as the
operator call number in program [121] “Automatic Outside (CO) Line Access Number
Selection”, 9 is regarded as the operator call number instead of an automatic line
access number.
• 0 as the operator call number when the operator is assigned in program
[008] “Operator Assignment” and “Without AA” is assigned in program [500]. Even if
“With AA” is assigned, 0 is regarded as the operator call number if nothing is assigned
to “0” in program [501]. If “0” is assigned as an automatic line access number in
program [121], 0 is regarded as an automatic line access number instead of the
operator call number.
• 0 through 9 as a built-in auto attendant number when “With AA” is assigned in
program [500]. The DISA AA Wait timer starts after receiving the first 1-digit number.
If the timer expires, the system will assume that the first digit is an AA number. The
time is assigned in program [517].
*5: A security code is necessary when program [511] is assigned as follows.
• All Security – the system waits for a security code dialed after “ ”. When the
security code matches the one programmed in [512], the system
accepts the numbers after the code.
• Trunk Security – the caller can access an outside (CO) line if the security code
matches the one programmed in [512]. The caller can access other
destinations without the security code.
If the entered number is the same as one of the security codes, a short beep will be
heard. The short beep can be disabled by program [518]. If the number is wrong,
3 beeps will be heard. The call will be disconnected after 3 failed attempts.
*6: The caller must enter the desired telephone number after hearing a dial tone from the
Central Office.
*7: The DISA Ring Timer Before Intercept starts. The destination telephone(s) will ring for
the time programmed in [508].
*8: The system treats the call according to program [507] as follows.
• Disconnect – the call is disconnected.
• Intercept –
the call is sent to the extensions programmed in [408]-[410] “Flexible
Ringing Assignment – Day/Night/Lunch”.
If the call is still not answered within the time programmed in [509], it will be
disconnected.
*9: If the destination extension belongs to a hunting group and all extensions in the group
are busy, the system will check the DISA Busy Mode. If the destination is a DISA ring
group, the DISA Busy Mode will not work for the call. The system regards the call as
unanswered.