manualshive.com logo in svg

Panasonic KX-TA616, Installation Manual, Page: 178 / 246

Share
Download
Panasonic KX-TA616 Installation Manual Download Page 178

4-60

System Programming

[523]-[524]

4.2

System Programming

Selects the operation when the length of time programmed in [521] “UCD Busy Waiting
Time” expires.  Intercept or Disconnect is available.

Intercept:

The call will be redirected depending on programs [408]-[410] “Flexible
Ringing Assignment–Day/Night/Lunch” (Intercept Routing feature).  The
extension which receives a redirected call rings during the length of time
programmed in [526] “UCD Ringing Time after Intercept”.

Disconnect: The call will be disconnected immediately.

Default

Intercept

• This program is effective only when “MODE 3” or “MODE 5” is selected in program [502]

“OGM Mode Selection”.  If “MODE 4” is selected, the call will be disconnected after the
UCD-END outgoing message.

• Feature References

Section 3, Features

Intercept Routing, Uniform Call Distribution (UCD)

[523] UCD Busy Mode*

1

2

5

NEXT

3

STORE

END

SELECT

(Intercept/

Disconnect)

!

!

☞

Selects the operation when all extensions in the UCD group do not answer an outside call
via the UCD feature within the length of time programmed in [525] “UCD Ringing Time
before Intercept”.  Intercept or Disconnect is available.

Intercept:

The call is redirected depending on programs [408]-[410] “Flexible Ringing
Assignment–Day/Night/Lunch” (Intercept Routing – No Answer feature).

Disconnect: The call is disconnected.

Default

Intercept

• Feature References 

Section 3, Features

Intercept Routing, Uniform Call Distribution (UCD)

[524] UCD Intercept Mode*

1

2

5

NEXT

4

STORE

END

SELECT

(Intercept/

Disconnect)

☞

*

1

: Required only when the optional OGM/FAX Detection

Card is installed.

Summary of Contents for KX-TA616























































































































































































































































Reviews:

No comments