manualshive.com logo in svg

Panasonic KX-TA616, Installation Manual, Page: 40 / 246

Share
Download
Panasonic KX-TA616 Installation Manual Download Page 40

2-24

Installation

2.18

Installing a 3-CO Line & 8 Ext Expansion Card (KX-TA30877)
and 8 SLT Extn. Expansion Card (KX-TA30874)

3-CO Line and 8 Ext Expansion Card Installation (KX-TA30877)

— for KX-TA308 only

To add 3 outside (CO) lines (outside (CO) lines 4 through 6) and 8 extensions (extension
jacks 09 through 16), use an optional 3-CO Line and 8 Ext Expansion Card 
(KX-TA30877).

8 SLT Extension Expansion Card Installation (KX-TA30874)

To add 8 extensions (extension jacks 17 through 24), use an optional 8 SLT Extension
Expansion Card (KX-TA30874).

This card can be installed directly to the system or to the KX-TA30877.

• Only a single line telephone (SLT) can be connected to extension jacks 17 through 24.

Installing the KX-TA30877 to the KX-TA308

1. Loosen the screws and open the top and bottom front covers.

2. Remove the lower front panel with pliers as shown below.  Cut the 6 areas marked

with a circle.

!

!

Lower front panel

Summary of Contents for KX-TA616























































































































































































































































Reviews:

No comments