Panasonic KX-TA616 Installation Manual Download Page 27

Page: 27 / 246

Installation

2-11

2.10

External Music Connection

One music source, such as a radio (user-supplied), can be connected to the system as
illustrated below.

Insert the plug to the earphone/headphone jack on the external music source.

Use an EIAJ RC-6701 A plug (2-conductor, ø 3.5mm in diameter).

• Input impedance: 8

Ω

Maximum length of the cable

AWG 18 – 22: Under 10 m

POWER

External Music Jack

External Music source

EXT.
MUSIC

• System programming for the music sources used for Music on Hold and Background

Music (BGM) is required.

• To adjust the sound level of the Music on Hold, use the volume control on the external

music source.

• Required System Programming

Section 4.2, System Programming

[111] Hold Music Selection

• Feature Reference

Section 3, Features

Music on Hold / Background Music (BGM)

☞

* The illustration on this page is a KX-TA308.

Summary of Contents for KX-TA616























































































































































































































































Search results

Summary of Contents for KX-TA616

Reviews:

Panasonic KX-TA616, Installation Manual, Page: 27 / 246

Search results

Summary of Contents for KX-TA616

Reviews: