manualshive.com logo in svg

Panasonic KX-TA616, Installation Manual, Page: 103 / 246

Share
Download
Panasonic KX-TA616 Installation Manual Download Page 103

Features

3-53

3

Features

S

System Data Default Set

This system can re-initialize the system-programmed data.  If all the programmed data is
cleared, the system will reset using the default settings by program [999].

• The default setting for each programming item is listed in Section 5.1, Default Values.

• Required System Programming

[999] System Data Clear

• Installation Reference

2.24 System Data Clear

☞

!

!

UCD waiting call: Shows <UCD waiting> for an incoming call via the UCD feature.

When the “UCD waiting call” is answered, it becomes  a
“Received call” and a new record  is started.

(6) Duration : shows the duration of the call or the UCD call waiting time in

Hours/Minutes/Seconds.

(7) Code: shows the account code appended to the call, account code index number 

(e.g.: 13), the extension number which uses the Toll Restriction Override by
Extension Password feature (e.g.: 101) or DISA security code status (e.g.: 0).
Code “0” indicates a DISA incoming call without a DISA security code.  Codes
“1 to 4” indicate a DISA incoming call with DISA security code 01 to 04
respectively.  For example, code 1 corresponds to DISA security code 01, etc.

• This system can store information of up to 64 calls.
• This data is not deleted even when the system is reset.
• If FLASH is manually sent out during a conversation to make another call without

hanging up, etc., a call record will be printed and a new record started.  “F/” will be
printed at the beginning of the dial number on the new record.

• When a host PBX code is entered, “=” will be printed between the code and dialed

number.

• Connection Reference 

2.13 Printer and PC Connection

• Required System Programming

[000] Date and Time Setting
[204] Call Duration Count Start Time
[800] SMDR RS-232C Communication Parameter
[801] SMDR Parameter
[802] Incoming/Outgoing Call Selection for Printing
[803] Secret Speed Dialing/One-Touch Dialing Printing
[804] System Data Dump
[805] SMDR Account Code Selection

• Related Feature Reference 

Language Selection

!

!

☞

Summary of Contents for KX-TA616























































































































































































































































Reviews:

No comments