manualshive.com logo in svg

Panasonic KX-TA616, Installation Manual, Page: 136 / 246

Share
Download
Panasonic KX-TA616 Installation Manual Download Page 136

4-18

System Programming

[111]-[112]

4.2

System Programming

[111] Hold Music Selection

Selects the music source, Internal, External or Tone, which an external party will hear when
an outside call is on hold.

External : Uses an external music source, such as a radio.
Internal : Uses the internal music source equipped with the system.
Tone : Uses the cyclic tone below equipped with the system.

Default

Internal

• The music source can also be used for BGM.

• Feature Reference

Section 3, Features

Music on Hold / Background Music (BGM)

1

SELECT

STORE

END

(Internal/

External/Tone)

NEXT

1

1

1 s

[112] DSS Console Indication Mode

Enables or disables the Busy Lamp Field (BLF) on the DSS button to indicate the status,
Forward (FWD) or Do Not Disturb (DND), of corresponding extensions.

* Enable: FWD – Flashing slowly, DND – Flashing moderately

Disable: FWD – Off, DND – Off

Default

Enable

• Feature Reference

Section 3, Features

DSS Console

1

1

2

SELECT

STORE

END

NEXT

(Enable/

Disable)

☞

!

!

☞

Summary of Contents for KX-TA616























































































































































































































































Reviews:

No comments