Panasonic KX-TA616 Installation Manual Download Page 132

Page: 132 / 246

4-14

System Programming

[103]

4.2

System Programming

Call State

Ringback Tone

Busy Tone

Reorder Tone

DND

Answer

Forwarded to

Voice Processing

System

(Ringing)

Forwarded to

Voice Mail

(Busy)

Forwarded to

Extension

Confirmation Tone

Disconnect

Conditions

When an extension a VPS has dialed is ringing.

When an extension a VPS has dialed is busy.

When a VPS dials an invalid extension number or when a VPS
is accidentally connected to another Voice Mail Port.

When an extension a VPS has dialed sets the DND (Do Not
Disturb) feature.

When an extension which a VPS has dialed answers the call.

When a called extension is forwarded to a VPS, the call can be
forwarded to another available VPS. In this way, the first VPS,
typically an Auto-Attendant, can release the call to another
VPS and receive another incoming call.

When a called extension is forwarded to a VPS and no VPSs
are available to receive the call.

When a called extension is forwarded to another, non-VPS
extension.

When a VPS has successfully turned a message waiting lamp
on or a message waiting lamp off.

When the calling party disconnects.

DTMF signals

Code

Summary of Contents for KX-TA616























































































































































































































































Search results

Summary of Contents for KX-TA616

Reviews:

Panasonic KX-TA616, Installation Manual, Page: 132 / 246

Search results

Summary of Contents for KX-TA616

Reviews: