manualshive.com logo in svg

Panasonic KX-NS700, Installation Manual, Page: 64 / 308

Share
Download
Panasonic KX-NS700 Installation Manual Download Page 64

Model No.

Activation Key Type

Description

Maximum Activation

Keys

KX-NSXF021

Queue Position
Announcement

Allows the use of queuing
information announcement.

1

KX-NSXF022

Built-in ACD report

Allows the use of ICD group
monitor by ACD supervisor, and
creation of ACD reports.

1

Packaged Activation Keys

These packaged activation keys include multiple activation keys. Installing one packaged activation key allows
you to install multiple activation key features at once.
For details of each feature, refer to relevant section of this manual:

•

E-mail (IMAP4) client and e-mail notification (voice/fax messages)

®

 Unified Messaging System (Mailbox)

•

Two-way Recording/Two-way Transfer

®

 Unified Messaging System (Two-way Recording/Two-way Transfer Users)

•

Cellular phone extension

®

 Cellular Phone Extension

•

CA Client Pro

®

 Communication Assistant (CA) User

Model No.

Activation Key Type

Description

KX-NSP101

Adv. Pkg 1 User

Allows the use of the following activation key
features for 1 user:

•

E-mail (IMAP4) client and e-mail notification 
(voice/fax messages)

•

Two-way Recording/Two-way Transfer

•

Cellular phone extension

•

CA Client Pro

KX-NSP105

Adv. Pkg 5 Users

Allows the use of the following activation key
features for 5 users:

•

E-mail (IMAP4) client and e-mail notification 
(voice/fax messages)

•

Two-way Recording/Two-way Transfer

•

Cellular phone extension

•

CA Client Pro

KX-NSP110

Adv. Pkg 10 Users

Allows the use of the following activation key
features for 10 users:

•

E-mail (IMAP4) client and e-mail notification 
(voice/fax messages)

•

Two-way Recording/Two-way Transfer

•

Cellular phone extension

•

CA Client Pro

64

Installation Manual

Document Version  2016-03  

3.1.1 Type and Maximum Number of Activation Keys

Summary of Contents for KX-NS700





















































































































































































































































































































Reviews:

No comments