manualshive.com logo in svg

Panasonic KX-NS700, Installation Manual, Page: 110 / 308

Share
Download
Panasonic KX-NS700 Installation Manual Download Page 110

4.3.2  SD Memory Cards

Function

SD Memory XS, S, M
Card:

If you install one of the SD Memory card, you can expand the number
of SMDR data.

SMDR data:

1000 (default), 40000 (with SD memory card)

Store ACD report data:

300,000

SD Memory XS:

SD Memory with maximum of 40 hours Voice Mail recording time.

SD Memory S:

SD Memory with maximum of 200 hours Voice Mail recording time.

SD Memory M:

SD Memory with maximum of 400 hours Voice Mail recording time.

SD Card

Mother Board

SD Card Slot

Accessories and User-supplied Items

Accessories (included):

 none

User-supplied (not included):

 none

Note

For installing and removing the SD Memory Card, refer to "4.2.6  Installing/Removing the SD Memory
Card".

110

Installation Manual

Document Version  2016-03  

4.3.2 SD Memory Cards

Summary of Contents for KX-NS700





















































































































































































































































































































Reviews:

No comments