manualshive.com logo in svg

Panasonic KX-NS700, Installation Manual, Page: 267 / 308

Share
Download
Panasonic KX-NS700 Installation Manual Download Page 267

Example:

PBX

Extensions

Estimated Time for Starting Up

KX-NS700

128 KX-UT series SIP phones

more than 5 minutes

•

PBX functions cannot be used until restarting is complete. The use of a UPS is recommended; even
a momentary power failure can result in a long delay as the PBX restarts, requiring the time as shown
above.

To reset the system at a preset time:

1.

Confirm that the System Mode Switch is in the "NORMAL" position.

2.

Start the Web Maintenance Console.

3.

Log in using the Installer level account.

4.

On the Home screen, click 

Maintenance

 

®

 

System Control

 

®

 

System Reset

 

®

 

Timed Reset

.

5.

Set the 

Site

, 

Reset Mode

, and 

Reset Time

 for the system reset.

For details about the settings, refer to the PC Programming Manual.

6.

Click 

Apply

 or 

OK

 to set the system reset.

The PBX will restart at the specified time.

PC Programming Manual References

5.3  System Control—System Reset

Document Version  2016-03  

Installation Manual

267

7.1.5 Restarting the PBX

Summary of Contents for KX-NS700





















































































































































































































































































































Reviews:

No comments