Panasonic KX-NS700 Installation Manual Download Page 252

Page: 252 / 308

Mailbox_result.txt is saved to the local PC.

The meaning of the status in the generated file is as follows:

User Profile Status

Description

Exist

The user profile already existed and was assigned to the related
mailbox and extension number.

Skipped

The user profile was already assigned to the related mailbox and
extension number.

Mailbox Status

Description

Created

The new mailbox was successfully created.

Failed

The new mailbox was not created.

Assigned

The mailbox already existed, but was successfully assigned to the
related extension number.

Exist

The mailbox was already assigned to the related extension
number.

Skipped

The mailbox already existed, but assigning it to the related
extension number failed.

The start and finish times of the automatic configuration is recorded in the syslog (INFO). For details, refer
to "7.3.2 Utility—Log—Syslog" in the PC Programming Manual.

252

Installation Manual

Document Version 2016-03

5.11 Automatic Configuration of Mailboxes

Summary of Contents for KX-NS700





















































































































































































































































































































Search results

Summary of Contents for KX-NS700

Reviews:

Related manuals for KX-NS700

Brands by name

Popular brands

Panasonic KX-NS700, Installation Manual

Search results

Summary of Contents for KX-NS700

Reviews:

Related manuals for KX-NS700

Brands by name

Popular brands