manualshive.com logo in svg

Panasonic KX-NS700, Installation Manual, Page: 147 / 308

Share
Download
Panasonic KX-NS700 Installation Manual Download Page 147

4.12  Power Failure Connections

When the power supply to the PBX and/or Expansion Unit fails, power failure transfer (PFT) will switch from
the current connection to the Power Failure Connection. Refer to "15.1.9  Power Failure Transfer" in the Feature
Manual for further information.
The table below shows PFT support Cards and PFT support ports.

PFT support Cards

PFT support ports

KX-NS700

Optional card KX-NS5180

Port 1-2

Pre-installed MCSLC4

Port 1-2

Note

•

A CO line conversation established during power failure can be maintained even when the power
returns and the connection is switched back to the normal configuration from the Power Failure
Connection.

•

KX-NS720 does not support PFT.

•

The maximum number of available PFT ports is always 2, regardless of the number of connected
Expansion Units.

Document Version  2016-03  

Installation Manual

147

4.12 Power Failure Connections

Summary of Contents for KX-NS700





















































































































































































































































































































Reviews:

No comments