Panasonic KX-NS300 Features Manual Download

Page: 573 / 580

Object ID

Item

Description

tcpInErrs

The total number of segments received in error.

tcpOutRsts

The total number of TCP segments sent containing the RST flag
(reset connection).

UDP Group (1.3.6.1.2.7)

Object ID

Item

Description

udpInDatagrams

The total number of UDP Datagrams received.

udpNoPorts

The total number of received UDP Datagrams for which there was
no application at the destination port.

udpInError

The total number of received UDP Datagrams which contained
error.

udpOutDatagrams

The total number of UDP Datagrams sent.

SNMP Group (1.3.6.1.2.1.11)

Object ID

Item

Description

snmpInPkts

The total number of SNMP messages received.

snmpOutPkts

The total number of SNMP messages sent.

snmpInBadVersions

The total number of received SNMP messages of which version is
unsupported.

snmpInBadCommunity
Names

The total number of SNMP messages with unknown Community
Name.

snmpInASNParseErrs

The total number of SNMP messages with incorrect OID type.

snmpInTotalReqVars

The total number of Objects which have been retrieved value
successfully.

snmpInGetRequests

The total number of Get-Request which have been accepted and
processed (e.g. Data extract by using snmpget/snmpwalk
command).

snmpInGetNexts

The total number of Get-Next which have been accepted and
processed (for at the time of following a layer-tree by using
snmpwalk command).

snmpOutTooBigs

The total number of sent SNMP messages which returned an error
of "TooBig".

snmpOutNoSuchNam
es

The total number of sent SNMP messages which returned an error
of "NoSuchName".

snmpOutGenErrs

The total number of sent SNMP messages which returned an error
of "GenErr".

snmpOutGetResponse
s

The total number of GetResponse sent.

snmpOutTraps

The total number of TRAP sent.

Feature Guide

573

6.4 Supported Management Information Base (MIB) Table

Summary of Contents for KX-NS300





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for KX-NS300

Reviews:

Related manuals for KX-NS300

Brands by name

Popular brands

Panasonic KX-NS300, Features Manual

Search results

Summary of Contents for KX-NS300

Reviews:

Related manuals for KX-NS300

Brands by name

Popular brands