5.2.6 Extension Port Configuration
Description
There are three types of extension ports as follows:
a.
DPT Port:
DPT, DSS Console, Panasonic VPS (DPT [Digital] Integration), or PT-interface CS (e.g.,
KX-TDA0158) can be connected.
b.
SLT Port:
SLT or Panasonic VPS (DTMF Integration) can be connected.
c.
Super Hybrid Port:
DPT, APT, SLT, DSS Console, Panasonic VPS, or PT-interface CS can be connected.
EXtra Device Port (XDP) of Super Hybrid Ports:
A DPT and SLT can be connected to one Super Hybrid port (TR: SLT, HL: DPT). In this case, the SLT port
(TR) of the Super Hybrid port can be used as an XDP port to connect an SLT as a sub telephone. There are
two modes for the XDP port as follows:
Mode
Description
Parallel Mode
The DPT and SLT have the
same extension number
so that they
can act as one extension. They use the main telephone’s (DPT’s)
extension data (e.g., extension number, COS).
(
®
2.11.10 Parallelled Telephone)
XDP Mode
The DPT and SLT have
different extension numbers
so that they
can act as completely different extensions. To use XDP mode, XDP
mode must be enabled (on) the port through system programming.
Conditions
•
Automatic Detection on Super Hybrid Port
A DPT, SLT, or PT-interface CS connected to a Super Hybrid port can be detected automatically without
any programming. An APT connected to a Super Hybrid port can be detected automatically when the XDP
mode has been disabled.
•
A DSS Console or a Panasonic VPS (DPT [Digital] Integration) can also be connected with an SLT in XDP
mode.
•
APT and SLT in Parallel Mode
An APT and an SLT can also be connected to a Super Hybrid port and used in parallel mode.
•
Digital XDP
A DPT can be connected to another DPT and act as a completely different extension. (
®
2.11.10 Parallelled Telephone)
•
Wireless XDP Parallel Mode
A PS can be used in parallel mode with a wired telephone.
(
®
5.2.4.5 Wireless XDP Parallel Mode)
•
DSS Console and Paired Telephone Assignment
When a DSS Console is connected, a paired extension must be assigned through system programming.
Only a PT can be a paired extension.
PC Programming Manual References
516
Feature Guide
5.2.6 Extension Port Configuration
Summary of Contents for KX-NS300
